Valeo unveils its aluminum Rear Door Cooling Module (RDHx) offering a 38% boost in cooling capacity and a 65% increase in power density compared to conventional copper equivalents.
Valeo also exhibits its full range of liquid cooling solutions including Direct-to-Chip (DtC) Cold Plates, Cooling Distribution Units (CDUs) in rack manifolds and loop heat pipe innovations.
November 18, 2026 – Paris — At Data Centre World (Tech Show Paris) from November 18 to 19, 2026, visitors at Booth M100 (Hall 5, Paris Expo Porte de Versailles) will get their first hands-on look at Valeo’s new aluminum Rear Door Cooling Module, showcased alongside a complete lineup of thermal management solutions.
As artificial intelligence (AI) workloads and high-performance computing (HPC) are pushing individual chip TDP (Thermal Design Power) beyond traditional limits, driving rack power densities past air-cooling threshold, data center operators face urgent need to switch from air to liquid cooling and reduce energy consumption. Drawing on decades of world-leading automotive thermal engineering and high-volume manufacturing expertise, Valeo brings automotive-grade reliability and industrial scalability to modern digital infrastructure.
Pascale Herman, Data Centers & BESS Vice President at Valeo, said: “We are proud to present our aluminum heat exchanger cooling module technology for the first time at Data Centre World Paris. Data centers today are caught between increasing AI compute densities and strict energy targets. Whether facilities are looking to upgrade existing racks or architect next-generation AI clusters from the ground up, Valeo’s offers a large portfolio of practical, scalable tools to cut power usage and sustainably while maximizing compute capacity.”
Efficient Rack Cooling: The Aluminum Rear Door Cooling Module (RDHx)
Valeo’s aluminum Rear Door Cooling Module provides a lightweight, sustainable alternative to traditional copper coils. Specifically engineered for high-density racks and fan wall applications across multiple rack sizes, the module achieves a 38% boost in cooling capacity and a 65% increase in power density over copper equivalents, while cutting electrical fan consumption by 25%. Protected by a proprietary Valeo surface coating engineered for long-term durability, the RDHx directly lowers both PUE (Power Usage Effectiveness) and CUE (Carbon Usage Effectiveness) in new builds and retrofit environments alike. Designed for cloud applications as well as air-cooled AI inference racks, this system is also highly relevant for upgrading existing infrastructures.
Direct-to-Chip Robustness: Hybrid material Cold Plates and Automotive-Grade in rack CDUs
For direct to chip cooling, Valeo is displaying both single-phase and two-phase Cold Plates designed for CPU and GPUs. Built around a multi-material architecture with a secure, no-seal casing saddle assembly process, these cold plates minimize copper usage for a lighter footprint while maximizing leak resistance. High-efficiency internal heat exchange design enables it to dissipate extreme heat fluxes reaching up to 200 W/cm² while optimizing pump mass flow.
Complementing the cold plates are Valeo’s Cooling Distribution Units (CDUs) and manifolds, both available for single or two-phase applications. Built to rigorous automotive quality standards to ensure continuous, zero-failure operation, these units feature hot-swappable pumps, brazed junction , failure prediction controls, and predictive maintenance software.
Upgrade Air cooled servers : Passive two-phase loop heat pipe technology
Today 47% of AI servers are air cooled, but best in-class air-cooled servers cannot run today’s top GPUs at full power. Co-developed in partnership with Calyos, Valeo is also demonstrating a passive two-phase Direct-to-Chip cooling system at server level powered by Loop Heat Pipe (LHP) technology. Utilizing capillary and gravity action rather than mechanical liquid pumps, the system offers higher cooling capacity versus air (+27%) thanks to the two-phase fluid and significantly reduces energy consumption (-40% fan consumption). This system is well suited as well for air cooled CPU racks used for inference tasks and also a smart autonomous cooling solution for edge compute applications.
About Valeo
Valeo is a leading global technology company creating innovative solutions and systems for automotive and technology partners worldwide. Valeo is structured around its POWER, BRAIN and LIGHT Divisions, and Valeo Service, the augmented service partner, for the aftermarket and new forms of mobility.
Valeo is committed to making mobility safer, more sustainable and affordable to all. The Group is playing a vital role in shaping the Car of Tomorrow: which will be electrified, safer and software-defined. Valeo is leveraging its global industrial footprint and its technological leadership in electrification, advanced driver assistance systems, lighting and software to capture an increasing share of value per vehicle.
Valeo is listed on the Paris Stock Exchange.
Valeo in brief: €20.9 billion in sales in 2025 | 100,000 employees worldwide | 29 countries | 149 production plants | 59 R&D centers | 19 distribution platforms (as of February 26, 2026).
Learn more at www.valeo.com
Find all our press releases: https://www.valeo.com/en/press-releases/
Media Contacts
Dora Khosrof | +33 7 61 52 82 75
Florentina Deca | +33 6 32 13 69 15
Caroline De Gezelle | + 33 7 62 44 17 85
Clémence Le-Roux | + 33 6 12 18 26 00
press-contact.mailbox@valeo.com
Investor Relations
valeo.corporateaccess.mailbox@valeo.com
